PSA Slotted Insert System PSA Slotted Insert System PSA Slotted Insert System

M‐Series Slotted Inserts

The M‐series slotted insert is a modification to the PSA slotted insert. It utilizes a lighter, more economical construction material for connection areas where load demand is not as substantial. It has all the benefits of the PSA and the added ability to accept either a bolted strap or a notched strap.

Benefits:

  • The same insert can accept either a threaded strap or a notched strap.
  • Available in a J‐finish coating, a 3 step coating process developed by the automotive industry. Salt spray test results of the J‐finish have shown superior performance to the traditional corrosion resistant coating of epoxy and hot‐dipped galvanized
  • The totally automated manufacturing process offers the credibility of consistent performance levels previously not possible.
  • Extensive performance reports provide the highest level of credibilty and are available for download.

PSA Threaded Strap Anchors

Benefits:

  • Flush placement of the threaded rod allows flat placement of the strap anchors thus eliminating the need for cumbersome shimming.
  • Available in J‐finish. The J‐finish applies full protection onto the threads.
  • A jam nut is supplied to accommodate the “push‐pull” movement of wind loads.
  • Available in 2" x 3/8" x 6",8",10" and 12" standard lengths. Custom Strap Geometries available in small and large quantities

PSA Notched Strap Anchors

Benefits:

  • Tight manufacturing tolerances result in a snugger-fitting connection, reducing undesirable "play".
  • Most economical strap
  • Available in J-finish.
  • Rapid installation in the field
  • Available in 2" x 3/8" x 6",8",10" and 12" standard lengths. Custom Strap Geometries available in small and large quantities.

 

 

Folders that contain (UC) in the folder name are currently "Under Construction" and do not contain any files for download. Files will be added in the future and the folder name updated accordingly.